Portals

Supplier Portal Broker Portal Carrier Portal Customer Portal Mobile app

Integrations

All integrations API docs

Industries

Fuel Propane Lubricants Chemicals Agriculture All industries

Resources

Guides Blog Glossary FAQ Security Features Pricing About Us Login Request a Demo

Home › Rackline › Supply · Documents

E10 vs E15 vs E85 at the Rack and Delivery Tank

E10, E15 and E85 differ in ethanol share, what the rack loads, which tanks and hoses can take them, and what the paperwork says. A table by blend.

Published
Reading time
5 min read

Key point

E10, E15 and E85 differ in ethanol share: about 10%, up to 15%, and 51% to 83% by volume. At the rack that changes what you ask the terminal to load, whether a dedicated E15 tank exists, what equipment the delivery tank needs, which summer rules apply, and what the bill of lading says.

What is the difference between E10, E15 and E85 for a distributor?

The difference is the ethanol share, and it moves every operational question: what loads at the rack, which tank takes it and what the paper says. EIA described E10 as the blend that accounts for more than 95% of the fuel consumed in gasoline vehicles (May 4, 2016). In the same 2016 article it put E85 at 51% to 83% ethanol by volume. In July 2019 it described E15 as up to 15% ethanol (EIA, July 16, 2019).

This post does not rank the blends or compare mileage.

How do E10, E15 and E85 compare at the rack and the delivery tank?

Take these questions to your terminal and your tank owner. The right-hand cells are things to confirm, not things that are always true.

Question E10 E15 E85
Ethanol share About 10% Up to 15% 51% to 83% (EIA, 2016)
What the rack loads A blendstock (BOB) plus ethanol, or finished E10 Ask whether the terminal sells it as a rack product or only blends E10 Ask whether the terminal offers it at all
Terminal availability Typically the default product; confirm with your terminal Ask which of your carded terminals list it, and whether it has a dedicated tank Ask for the terminal’s product list and any lead time
Delivery tank, hose and meter Normal gasoline equipment Confirm the equipment’s rating for E15 with its maker; EIA noted E15 is slightly more corrosive (2019) Confirm rated equipment with its maker before a first load
Summer volatility limit The summer RVP standard, generally with a 1.0 psi ethanol allowance where the state allows it; see the RVP changeover post Subject to separate summer rules; check year by year Check with the terminal and your regulator
Bill of lading and placard Gasoline entry on the BOL The paper and placards can differ from gasoline; copy the paper The paper and placards can differ from gasoline; copy the paper
Price basis Rack price for the product loaded A separate rack line if it is a separate product A separate rack line if it is a separate product

What does the rack actually load?

For E10, the terminal loads a blendstock for oxygenate blending (BOB) and ethanol. EIA said refiners produce BOBs that are blended with ethanol to make finished gasoline, and that nearly all fuel ethanol is blended with a BOB to produce E10 (2016).

For E15 and E85 the answer depends on the terminal, so ask three things: is the blend sold as a rack product, is it a separate line on the price sheet, and is the BOL product description the blend’s name? Do not assume a terminal that sells E10 can load E15 on request.

Say you lift 8,000 gallons. The numbers below are plain illustration of the ethanol share, not any terminal’s recipe.

Blend Ethanol share Ethanol in 8,000 gal Non-ethanol gasoline
E10 10% 800 gal 7,200 gal
E15 15% 1,200 gal 6,800 gal
E85 at 83% 83% 6,640 gal 1,360 gal

Same truck, very different loads. The product line on the BOL is the record of which blend left the rack.

Where can I get E15, and does a dedicated tank matter?

Availability is a terminal-by-terminal question, and the EIA figures cited here are old. In 2019 EIA cited a trade association count of more than 1,800 retail stations in 31 states selling E15, and said fewer than 2% of retail stations nationally offered it. Those figures are from July 16, 2019 and do not describe 2026.

For supply planning, ask each terminal in your lane list: does it list E15, does it have a tank dedicated to it, and what is the cutoff for a new product on your account? If the answer is “blended on request”, ask for the lead time in writing.

Can my tank and hoses take E15 or E85?

Only equipment rated for the blend can, so check the rating before the first load. EIA noted that new fueling stations typically install E15-compliant equipment, while older stations may need to install new equipment, and that retrofits can be cost-prohibitive if they require replacing underground storage tanks (July 16, 2019).

For E85, EIA reported that fuel sold as E85 can only be used in flex fuel vehicles (2016). On the delivery side, treat E85 as its own product: confirm with the equipment maker that the tank, hose and meter are rated for it, and ask your safety lead how compartments are used between loads.

Check the vehicle side too. EIA said EPA’s partial waiver allowed E15 in model year 2001 and newer vehicles, so a customer’s fleet is part of the question.

How do summer RVP limits apply to E15?

Summer volatility rules have historically been the sticking point for E15. EIA wrote in 2019 that the 2011 partial waiver left in place the prohibition on selling E15 in conventional fuel markets during the summer driving season of June 1 to September 15, and that EPA’s May 31, 2019 final rule effectively opened the opportunity for year-round E15 sales in most markets.

We could not confirm from an EPA page, on October 27, 2026, what applies to E15 this summer cycle, so we state no current status here. That status has changed by waiver and rule in different years. Confirm it with your terminal and EPA before you promise a customer summer E15 supply. For how the seasonal changeover works, read the winter blend RVP changeover.

What do the BOL and placard say for each blend?

The BOL product line names what was loaded, and the delivery ticket names what was discharged, so the two should describe the same blend. The delivery ticket is the record made at your tank; the BOL is the record made at the rack.

E15 and E85 are both above 10% ethanol, so do not assume the gasoline description and placard wording apply. The placard post covers how the paper and tank markings are read, including a note on gasoline-alcohol blends above 10%. Copy the description on the paper; classification is the shipper’s call, not the driver’s.

On quantity, gross and net gallons apply to every blend, so check which basis the BOL and your contract use.

When you do not need more than your current supplier

If your sites run E10 only, your supplier already delivers it and your tanks are rated for it, you have nothing to change. The same is true if your supplier handles E15 or E85 for you and you buy delivered, since the rack questions above are theirs to answer. A jobber or branded supplier that already lists the blend with its own terminal access is the simplest route.

Look further only when a terminal you need does not list the blend, when lead times for a new product are the problem, or when you compare delivered prices across suppliers. For the price mechanics, see how rack prices are set and branded vs unbranded fuel. RINs are the compliance side of biofuels; RINs for biofuel distributors covers them for biodiesel and renewable diesel.

Sources

  1. Almost all U.S. gasoline is blended with 10% ethanol (EIA, May 4, 2016)eia.gov
  2. New EPA ruling expands sale of 15% ethanol blended motor gasoline (EIA, July 16, 2019)eia.gov